Page # of 1  
View:
RAM Mounts Triple Suction Contour-Adapting Platform with 1.5-inch "C" Ball


               The RAM Mounts Contour-Adapting Platform is a triple-suction cup mount capable of gripping securely to a non-planar surface such as the bow of a kayak or the side of a canoe.… []

Eyebolt Kit


The Kayalu KLA-5001 Eyebolt Kit provides do-it-yourself installation of a small eyelet on your kayak, canoe or boat, allowing your Kayalu accessory (Kayalite, Kayacam, Kayaball, Kayapod) to be easily secured to and detached from any surface currently lacking an existing point of attachment.… []

1/4" Bungee and Breech Clip Assembly


The KLA-5003 1/4" Bungee and Breech Clip Assembly is a replacement cable and fastener designed exclusively for Kayalu products including Kayalite, Kayacam, Kayaball and Kayapod.… []

Track Mount Eye


The Kayalu KLA-5072 Track Mount Eye enables a Kayalu "Secure-Attach" product (Kayalite, Kayacam, etc.) to be easily clipped to, mounted securely on, and detached from any standard kayak/canoe gear track. The Track Mount Eye can be used on wide and narrow gear tracks. No additional components are needed for mounting a Kayalite on a wide gear track, one having a minimum width of at least 1.5 inch (4 cm)… []

3/16" Bungee and Breech Clip Assembly


The KLA-5009 3/16" Bungee and Breech Clip Assembly is a replacement cable and fastener designed exclusively for cables included with our nClamp™ and RAM Locking Suction products.… []

Binocular Adaptor


This binocular adaptor can be mounted atop any camera tripod or camera/video mount having a standard 1/4"-20 male stud.… []

RAM 1/4"-20 Thread Camera Ball with 1.5-inch Dia. "C" Ball


The 1.5-inch diameter Camera Adaptor Ball is manufactured by RAM Mounting Systems, Inc. of marine-grade, anodized aluminum, with a 1.5-inch diameter rubber powder-coated ball and a standard 1/4"-20 tripod screw. This screw will mate with the standard threaded tripod hole on cameras and speedlights. The 1/4"-20 thread is also compatible with many professional camera heads.… []

RAM Camera/Video Adaptor Base


The RAM Camera/Video Adaptor is compatible with all RAM Mounts socketed couplers accepting a 1-inch "B" ball, including our Radpole, ParkerMount, Locking Suction and nClamp mounts.… []

RAM 1/4"-20 Thread Camera Ball with 1-inch Dia. "B" Ball


The RAM Camera Adaptor Ball can be substituted for the RAM wide-base video adaptor included, for example, on products such as our nClamp Video Camera Mount, our RAM Locking Suction Video Mount and our ParkerMount Video Camera Mount.… []

RAM Aluminum "C" Ball with 3/8"-16 Stud for Camera Heads


This marine-grade aluminum ball and stainless steel threaded stud can be coupled with all RAM Mounts arms accepting a 1.5-inch "C" ball, including our Surfpole mounts.… []

Eyelet Insert for RAILBLAZA StarPort Mounts


The Eyelet Insert for RAILBLAZA StarPort Mounts provides an opportunity to mount a Kayalite or other product using the Kayalu "Secure-Attach" system to RAILBLAZA mounting systems or any similar star-shaped mounting system.… []

RAM Mounts "B" Ball Base with Hardware


This Rigid Base kit includes a RAM Mounts anodized aluminum base along with our own marine-grade stainless steel hardware. We also add an industrial drill bit correctly sized for the included bolts.… []

RAM Mounts 1-inch "B" Ball for GoPro Hero Cameras (all models)


The GoPro Hero Adaptor Ball, manufactured by RAM Mounting Systems, enables your GoPro Hero camera (all models) to be coupled with any base, extension arm or camera mount accepting RAM's popular 1-inch "B" ball.… []

RAM Mounts "C" Ball Base with Hardware


This Rigid Base kit includes a RAM Mounts anodized aluminum base, along with our own marine-grade stainless steel hardware. We also add an industrial drill bit correctly sized for the included bolts.… []

RAM Mounts 2.875" Aluminum Socket Arm for 1-inch "B" Balls


The RAM Mounts Aluminum 2.875" Socket Arm is a coupler that allows for a ball-and-socket connnection between two RAM Mounts 1-inch diameter "B" size balls.… []

RAM Mounts 4.63" Aluminum Arm for 1.5-inch "C" Balls


The RAM Mounts 4.63" Arm is a coupler that allows for a ball-and-socket connnection between two RAM Mounts 1.5" diameter "C" balls.… []

RAM Mounts Marine-Grade Aluminum "Knuckle" Triple "B" Ball


The RAM Mounts triple ball is the ideal adaptor for allowing an existing RAM arm to host two separate devices or accessories.… []

RAM Mounts 1.5-inch "C" Ball with YakBastard-compatible Threaded Stud


Manufactured by RAM Mounting Systems, this part is a marine-grade anodized aluminum 1.5-inch "C" ball with a thread size compatible with the Kayalu YakBastard clamp.This ball is intended for freshwater and saltwater use.Along with this "C" ball, we include a special anodized aluminum washer, ensuring a tight mate between the ball's mast and the YakBastard's clamp.The ball can be screwed into either hole on a YakBastard. It can be bonded to the YakBastard using Loctite threadlocker.NOTE: This part is not intended to be screwed into a camera. The threads on this ball (KLA-5061) are non-standard, specifically matched to mate with the threaded holes on a Kayalu YakBastard clamp. If you are interested in a 1.5-inch "C" ball with 1/4"-20 threads for a camera, click here.… []

Kayalu Toughbar™ 8" Extension Rod


The Toughbar™ Extension Rod is a marine-grade, anodized aluminum and stainless steel bar with two RAM Mounts 1-inch "B" balls, one at each end. Each ball is fused to the rod using Loctite® threadlocker. The Toughbar's hardened steel bar is insulated with UV-resistant PVC.… []

Kayalu Toughbar™ 10" Extension Rod


The Toughbar™ Extension Rod is a marine-grade, anodized aluminum and stainless steel bar with two RAM Mounts 1-inch "B" balls, one at each end. Each ball is fused to the rod using Loctite® threadlocker. The Toughbar's hardened steel bar is insulated with UV-resistant PVC.… []

Kayalu Toughbar™ 14" Extension Rod


The Toughbar™ Extension Rod is a marine-grade, anodized aluminum and stainless steel bar with two RAM Mounts 1-inch "B" balls, one at each end. Each ball is fused to the rod using Loctite® threadlocker. The Toughbar's hardened steel bar is insulated with UV-resistant PVC.… []

Kayalu Toughbar™ 8.5" Extension Arm


The Kayalu Toughbar™ is a premium-grade 8.5" (22 cm) stainless steel extension arm compatible with all RAM Mount assemblies using RAM's 1-inch "B" ball, including camera mounts, GPS mounts, iPhone and iPod mounts, fishfinder mounts, binocular mounts — virtually any device mount that uses RAM Mounts' popular 1-inch "B" size ball-and-socket system.… []

Kayalu Toughbar™ 10.5" Extension Arm


The Kayalu Toughbar™ is a premium-grade 10.5" (27 cm) hardened stainless steel extension arm compatible with all RAM Mount assemblies using RAM′s 1-inch "B" ball, including camera mounts, GPS mounts, iPhone and iPod mounts, fishfinder mounts, binocular mounts — virtually any device mount that uses RAM Mounts' popular 1-inch "B" size ball-and-socket system.… []

Kayalu Toughbar™ 14.5" Extension Arm


The Kayalu Toughbar™ is a premium-grade 14.5" (37 cm) hardened stainless steel extension arm compatible with all RAM Mount assemblies using RAM′s 1-inch "B" ball including camera mounts, GPS mounts, iPhone and iPod mounts, fishfinder mounts, binocular mounts — virtually any device mount that uses RAM Mounts' popular 1-inch "B" size ball-and-socket system and having a fixed base.… []

Kayalu Toughbar™ Elbow


The Kayalu Toughbar™ Elbow is a multi-jointed 19.5" (49.5 cm) extension comprised of an 8.5 inch Toughbar attached to a 10.5 inch Toughbar. The extension elbow allows you to modify your existing RAM Mounts assembly to allow for incredibly versatile positioning, while retaining an unparalleled level of strength and rugged reliability.… []

Kayalu Toughbar™ XL 12.5" Extension Arm


The Kayalu Toughbar™ XL-12 is a premium-grade 12.5" (31.75 cm) aluminum extension arm compatible with all RAM Mount assemblies using RAM's 1-inch "B" ball, including camera mounts, GPS mounts, iPhone and iPod mounts, fishfinder mounts, binocular mounts — virtually any device mount that uses RAM Mounts' popular 1-inch "B" size ball-and-socket system.… []

RAM "B" Ball Extension Arm with Ball


The KLA-5005 Extension Arm adds 5" (12.7 cm) of height and two degrees of freedom to a wide variety of products supporting a RAM 1-inch "B" Ball available from RAM Mounts and the Kayalu catalog.… []

Backing Plate for Kayalu and RAM Mounts Bases


As an option to provide additional strength to your Kayalu Radpole, Kayalu Surfpole, Kayalu ParkerMount, RAM Mounts fishing rod holders and other RAM Mounts bases on deck, this 3" x 3" marine-grade aluminum backing plate can be installed beneath the deck surface where it mates with the base above.… []

RAM "B" Ball Marine Grade Aluminum Extension "Finger"


The KLA-5039 Extension Finger adds 5" (12.7 cm) of height and two degrees of freedom to a wide variety of products supporting a RAM 1-inch "B" Ball available from RAM Mounts and the Kayalu catalog.… []

RAM "C" Ball Extension Arm with Ball


The lightweight aluminum KLA-5028 Extension Arm adds 7" (18 cm) of height and two degrees of freedom to a wide variety of products supporting a RAM 1.5-inch "C" Ball available from RAM Mounts and the Kayalu catalog.… []

RAM Mounts "B" Wedge adaptor for Scotty and Hobie Mounts


The RAM Ball Wedge Mount adaptor is a great way to provide a versatile mounting point to your existing Scotty or Hobie fishing rod mount opening or sail port. With the addition of this adaptor, your existing Scotty/Hobie base can be used to support a wide variety of Kayalu and RAM products. The RAM Ball Wedge Mount adaptor sports a standard RAM 1" B-size ball.… []

RAM Dual "C" Ball Extension Arm with Ball


The lightweight aluminum KLA-5029 dual arm and double-ball can replace a standard RAM 1.5-inch "C" Ball arm, providing a full 12" (31 cm) of length between two existing "C" balls connected by this assembly. This extension's double-ball also adds a new degree of freedom to your existing assembly.… []

RAM Mounts "B" Wedge adaptor for Attwood and Fish-On Mounts


The RAM Ball Wedge Mount adaptor converts your existing Attwood or Fish-On mount opening or sail port to host an array of Kayalu and RAM accessories. This wedge mount is also sized to fit into RAM Mounts Fish Rod & Tube Holder bases.… []

RAM Mounts "C" Wedge adaptor for Scotty and Hobie Mounts


The RAM Mounts "C" Ball Wedge adaptor is a great way to provide a versatile mounting point to your existing Scotty or Hobie accessory opening, rod mount or sail port.… []

RAM Mounts "C" Wedge adaptor for Attwood and Fish-On Mounts


The RAM Mounts "C" Ball Wedge adaptor is a great way to provide a versatile mounting point to your existing Attwood or Fish-On accessory opening, rod mount or sail port. This wedge mount is also compatible with RAM Mounts Fish Rod & Tube Holder openings.… []

Kayalu Experimentor's Kit


Are you interested in experimenting with our patented Secure-Attach™ mounting system?… []

NavBeam™ XL (4-LED) Headlight with RAM Mounts Ball


The Kayalu NavBeam is a ruggedized bright-white LED headlight for a kayak, canoe, inflatable or other small watercraft, integrated with a standard RAM Mounts ball for attachment to any RAM-compatible mount. The NavBeam is no ordinary LED flashlight, it's actually a submersible light capable of operating in fog, rain, ice and sleet — even at 1000 feet (300 m) below sea level.… []

NavBeam™ LE Headlight with RAM Mounts Ball


The Kayalu NavBeam is a ruggedized bright-white LED headlight for a kayak, canoe, inflatable or other small watercraft, integrated with a standard RAM Mounts ball for attachment to any RAM-compatible mount. The NavBeam is no ordinary LED flashlight, it's actually a submersible light capable of operating in fog, rain, ice and sleet — even at 1000 feet (300 m) below sea level.… []

Clear Lens for Kayalite®, R25®, NavBeam™ and Tektite Mark III


This clear lens is compatible with the Kayalite® kayak light, R25® Electric Torch, NavBeam™ headlights (all models) and Tektite Mark III marker lights.… []

White Diffusion Lens for Kayalite®, R25®, NavBeam™ and Tektite Mark III


This white diffusion lens is compatible with the Kayalite® kayak light, Kayalu R25® Electric Torch, Kayalu NavBeam™ headlights (all models) and Tektite Mark III marker lights.… []

1-LED Replacement Module for Kayalu Kayalite®, R25®, NavBeam™, NavLite Red/Green and Tektite Mark III Lights


This 1-LED replacement module is compatible with the Kayalu Kayalite® (all models), Kayalu WaterTorch® (all models), Kayalu R25® Electric Torch, Kayalu NavBeam™ headlights (all models), NavLite Red/Green Bow Light and Tektite Mark III marker lights.… []

2-LED Replacement Module for Kayalu Kayalite®, R25®, NavBeam™, NavLite Red/Green and Tektite Mark III Lights


This 2-LED replacement module is compatible with the Kayalu Kayalite® (all models), Kayalu WaterTorch® (all models), Kayalu R25® Electric Torch, Kayalu NavBeam™ headlights (all models), NavLite Red/Green Bow Light and Tektite Mark III marker lights.… []

4-LED Replacement Module for Kayalu Kayalite®, R25®, NavBeam™, NavLite Red/Green and Tektite Mark III Lights


This 4-LED replacement module is compatible with the Kayalu Kayalite® (all models), Kayalu WaterTorch® (all models), Kayalu R25® Electric Torch, Kayalu NavBeam™ headlights (all models), NavLite Red/Green Bow Light and Tektite Mark III marker lights.… []

Replacement Light Body for Kayalu Kayalite®, NavBeam™, NavLite Red/Green and Tektite Mark III Lights


This replacement light body is compatible with the Kayalu Kayalite® kayak light, Kayalu NavBeam™ headlights (all models), NavLite Red/Green Bow Light and Tektite Mark III marker lights.… []

RAM Mounts 1.5-inch "C" to 1-inch "B" Coupler


RAM Mounts composite coupler for connecting 1.5-inch "C" ball to 1-inch "B" ball.… []

RAM Mounts Suction Cup Replacement


Replacement suction cup and power-locking mechanism for assembly into existing mount. Compatible with all Kayalu suction mounts including single cup, dual-suction, triple-suction platform, triple-suction contour, WaterTorch and WaterTorch XT, and Suckerpod. Manufactured by RAM Mounting Systems. Assembly: Unscrew cup from existing assembly (2 screws). Screw new cup to existing assembly.… []

Vanguard PH-20 Pan-Tilt Camera Head with RAM "C" Ball


The Vanguard PH-20 Camera Head is a full-featured pan-tilt head with a standard 1/4"-20 tripod thread accepted by cameras, video gear and speedlights.… []

RAM Mounts "C" to "B" Adaptor Arm


The RAM Mounts "C" to "B" Adaptor Arm allows gear poles compatible with RAM Mounts 1.5-inch "C" balls (i.e. a Kayalu Surfpole) to host devices and cradles using a RAM Mounts 1-inch "B" ball.… []

Page # of 1  
Five Shipping Logo
Verified Secure
Acceptance Mark
Visa, Mastercard
American Express, Discover
PayPal Certified Merchant